Air release valve delivery information

Column:Company News Time:2026-11-20
Thirty-five air release valves left the factory on November 20, 2026: 30 pcs DN25 single orifice and 5 pcs DN80 double orifice, PN16, ductile iron, flanged to EN 1074-4. Every valve was pressure tested and packed in wooden cases for sea freight.

Most valve factories make one thing well. Buyers rarely need one thing. The order that left the factory on November 20 needed two: 30 pcs DN25 single orifice air valves and 5 pcs DN80 double orifice air valves, both PN16, both ductile iron, both flanged.

The two types do different jobs. The single orifice DN25 sits on distribution lines and branch connections, where its task is steady: running water releases dissolved air, the air collects at high points, and the valve bleeds it off continuously through the small orifice. The double orifice DN80 works on mains, where filling and drain-down move far more air: the large orifice vents at full bore during filling, then the small orifice takes over once the line runs under pressure.

Both types answer to the same standard. The nameplate on the DN25 reads EN 1074-4, the European requirement for air valves in water supply, and the DN80 body carries its own casting: DN80 PN16 GGG50, with the year 2026 cast into the body. Nothing on the shipment is anonymous. Every valve was pressure tested before packing, and each DN80 travels with a contract number and serial number on its label.

Thirty-five valves, two types, one order, one supplier. For a water utility or a contractor buying for a network, that is the point: the small lines and the mains do not have to come from different factories.

6afff5f48eddd.jpg

6afff5f50c467.jpg

6afff5f601df4.jpg

6afff5f817439.jpg

6afff5fb108b9.jpg

6afff60025e1e.jpg